Violations Detected : 1 (求助急)

[复制链接]

2768|0

手机看帖

扫描二维码
随时随地手机跟帖

电梯直达

楼主

tigris|

楼主 | 2008-4-11 08:36 | 只看该作者回帖奖励

|倒序浏览 |阅读模式

TI, Detect, vi, IO, NET

马上要送去做板子了请教

Processing Rule : Clearance Constraint (Gap=0.3302mm) (InNet('+5V') Or InNet('+24V') Or InNet('-12V') Or InNet('-24V')Or InNet('DGND')Or InNet('GND4')Or InNet('AGND')),(All)
Rule Violations :0

Processing Rule : Width Constraint (Min=0.3mm) (Max=2mm) (Preferred=2mm) (InNet('DGND')Or InNet('AGND') Or InNet('GND1') Or InNet('GND2')Or InNet('GND3') Or InNet('GND4'))
Rule Violations :0

Processing Rule : Width Constraint (Min=1.5mm) (Max=1.5mm) (Preferred=1.5mm) (InNet('+24V') Or InNet('+5V') Or InNet('-12V') Or InNet('-24V'))
Rule Violations :0

Processing Rule : Short-Circuit Constraint (Allowed=Yes) (InNet('AGND')),(InNet('DGND'))
Rule Violations :0

Processing Rule : Broken-Net Constraint ( (All) )
Rule Violations :0

Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0

Processing Rule : Hole Size Constraint (Min=0.0254mm) (Max=4.76mm) (All)
Rule Violations :0

Processing Rule : Width Constraint (Min=0.254mm) (Max=0.254mm) (Preferred=0.254mm) (All)
Rule Violations :0

Processing Rule : Clearance Constraint (Gap=0.254mm) (All),(All)
Rule Violations :0

Violations Detected : 1

使用特权