菜鸟问题：用STM8的例程建了个工程一大堆错误麻烦大侠指点

只看该作者 · 2009-5-13 20:45

按照微芯力科技术资料《stm8建立工程讲解》建立工程出现了一大堆问题？而用三合一开发板配套的那5个简单的例程建立工程没点问题。那些带ST的函数库的都有错误，望大侠们指点下
错误如下：
----------- Project uart - STM8 Cosmic - Configuration Debug -------------
Removing intermediate files ... Done!

----------- Project uart - STM8 Cosmic - Configuration Debug -------------

Compiling main.c...
cxstm8 -i.. +debug -pxp -no -l +mods0 -pp -i"F:\STM8S\COSMIC for STM8\Hstm8" -clDebug\ -coDebug\ main.c
#error cpstm8 main.c:23 can't open stm8s_lib.h
#error cpstm8 main.c:53(20) missing prototype
#error cpstm8 main.c:56(26) missing prototype
#error cpstm8 main.c:58(16) missing prototype
#error cpstm8 main.c:69(14) missing prototype
#error cpstm8 main.c:69(19) missing )
#error cpstm8 main.c:69(136) missing ;
#error cpstm8 main.c:76(18) missing prototype
#error cpstm8 main.c:76(37+6) ENABLE undefined
#error cpstm8 main.c:76(19+16) UART2_IT_RXNE_OR undefined
#error cpstm8 main.c:69(16+3) u32 undefined
#error cpstm8 main.c:56(27+21) CLK_PRESCALER_HSIDIV1 undefined
main.c:
The command: "cxstm8 -i.. +debug -pxp -no -l +mods0 -pp -i"F:\STM8S\COSMIC for STM8\Hstm8" -clDebug\ -coDebug\ main.c " has failed, the returned value is: 1
exit code=1.

uart.elf - 14 error(s), 0 warning(s)