今天试着烧一个别人给的FLASH程序，烧的时候提示“会烧到RAM区，可能无法上电自运行”，我点了“忽视”，只是想试一下。结果烧完测试无法自运行..那也就算了..问题是为什么现在连仿真器都连不上去了呢？
点“connect”，出现致命错误：
Error connecting to the target:
Error 0x80000240/-121
Fatal Error during: Initialization, OCS,
This error was generated by TI's USCIF driver.
SC_ERR_CMD_HANDLE <-121>
A bad controller handle has been given to a function,
either before attempting to open the controller, or after
having opened the controller and ignored its error status.
Valid controller handles are generated when attempts
to open the controller return a clean error status.
Sequence ID: 0
Error Code: -121
Error Class: 0x80000240
I/O Port = 240
Board Name: F2812 XDS510 Emulator
Cpu Name: CPU_1
之后点“Retry”的话，出的是另外一个错误代码：
Error connecting to the target:
Error 0x80000200/-1037
Fatal Error during: OCS,
PTI_ERR_EMU_CLOSE Error Occured at 0x00000000
Sequence ID: 0
Error Code: -1037
Error Class: 0x80000200
I/O Port = 240
Board Name: F2812 XDS510 Emulator
Cpu Name: CPU_1
晕啊...难道是哪里烧了？不至于吧？这是怎么回事呢？知道的大侠一定要帮帮忙！ |
楼主
标题置顶
标题高亮
