*** Using Compiler 'V5.05 update 2 (build 169)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
Rebuild target 'Tamplate'
assembling startup_stm32f10x_hd.s...
compiling main.c...
linking...
Program Size: Code=372 RO-data=320 RW-data=0 ZI-data=1632
FromELF: creating hex file...
".\Objects\Tamplate.axf" - 0 Error(s), 0 Warning(s).
Build Time Elapsed: 00:00:02
Load "D:\\Tamplate\\Objects\\Tamplate.axf"
Set JLink Project File to "D:\Tamplate\JLinkSettings.ini"
* JLink Info: Device "STM32F103VE" selected.
JLink info:
------------
DLL: V4.98e, compiled May 5 2015 11:00:52
Firmware: J-Link V9 compiled Sep 1 2016 18:29:50
Hardware: V9.40
S/N : 59404224
Feature(s) : RDI, GDB, FlashDL, FlashBP, JFlash
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 001BB000 SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 001BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 000BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 001BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 001BB923 TPIU-Lite
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 101BB924 ETM-M3
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103VE
VTarget = 3.275V
State of Pins:
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 5000 kHz
Erase Done.
Programming Done.
Verify OK.
Flash Load finished at 22:21:52 |