用FE5输出PWM，用的TIM9时钟

[复制链接]

230|0

手机看帖

扫描二维码
随时随地手机跟帖

电梯直达

楼主

奔跑的猫ちゃん|

楼主 | 2018-7-9 17:36 | 只看该作者回帖奖励

|倒序浏览 |阅读模式

TI, 时钟, PWM, pi, IO

我用的是STM32F4想用PE5输出PWM，但在主函数调用没有任何反应，有大神能找出里面的错误吗
void PWM_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
TIM_OCInitTypeDef  TIM_OCInitStructure;

RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM9,ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE);

GPIO_PinAFConfig(GPIOE,GPIO_PinSource5,GPIO_AF_TIM9);

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOE,&GPIO_InitStructure);

TIM_TimeBaseStructure.TIM_Prescaler=167;
TIM_TimeBaseStructure.TIM_CounterMode=TIM_CounterMode_Up;
TIM_TimeBaseStructure.TIM_Period=1000;
TIM_TimeBaseStructure.TIM_ClockDivision=TIM_CKD_DIV1;

TIM_TimeBaseInit(TIM9,&TIM_TimeBaseStructure);//3

TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
      TIM_OCInitStructure.TIM_Pulse = 500;
   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
TIM_OC1Init(TIM9, &TIM_OCInitStructure);

TIM_OC1PreloadConfig(TIM9, TIM_OCPreload_Enable);

TIM_ARRPreloadConfig(TIM9,ENABLE);

TIM_CtrlPWMOutputs(TIM9, ENABLE);

      TIM_Cmd(TIM9, ENABLE);

}

使用特权