编译错误如下：
..COREstartup_stm32f756xx.s(56): error: A1163E: Unknown opcode MODULE , expecting opcode or Macro
..COREstartup_stm32f756xx.s(59): error: A1163E: Unknown opcode SECTION , expecting opcode or Macro
..COREstartup_stm32f756xx.s(61): error: A1163E: Unknown opcode SECTION , expecting opcode or Macro
..COREstartup_stm32f756xx.s(65): error: A1163E: Unknown opcode PUBLIC , expecting opcode or Macro
..COREstartup_stm32f756xx.s(67): error: A1159E: Label missing from line start
..COREstartup_stm32f756xx.s(68): error: A1355U: A Label was found which was in no AREA
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_usart.c(1968): error: #20: identifier "USART_ISR_REACK" is undefined
if(USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, TEACK_REACK_TIMEOUT) != HAL_OK)
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_usart.c: 0 warnings, 1 error
compiling stm32f7xx_hal_pwr_ex.c...
compiling stm32f7xx_hal_uart.c...
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_uart.c(2044): error: #20: identifier "USART_ISR_REACK" is undefined
if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_uart.c: 0 warnings, 1 error
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_tim_ex.c(1911): error: #20: identifier "TIM_SMCR_OCCS" is undefined
tmpsmcr &= ~TIM_SMCR_OCCS;
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_tim_ex.c(1924): error: #20: identifier "TIM_SMCR_OCCS" is undefined
htim->Instance->SMCR &= ~TIM_SMCR_OCCS;
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_tim_ex.c(1941): error: #20: identifier "TIM_SMCR_OCCS" is undefined
htim->Instance->SMCR |= TIM_SMCR_OCCS;
..HALLIBSTM32F7xx_HAL_DriverSrcstm32f7xx_hal_tim_ex.c: 0 warnings, 3 errors
我对比了一下，探索者的启动文件和我在官方下载的启动文件不一样！烦请原子兄指导一下！
这是官方下载的启动文件如下：
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACKATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
这是探索者的启动文件如下：
Stack_Size EQU 0x00000800
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
请问有什么区别？ |
楼主
标题置顶
标题高亮
