程序有什么问题

1万 · 2020-7-26 12:27

void main (void)
{
uchar reg_rddata;
LCD_Reset();
LCD_Initial();
LCD_CLR();
WriteDataToREG(0x00,0xcd);
SetXY(0x00,0x00);
Display_Chinese(tab1,160);

  reg_rddata = ReadDataFromREG(0xa0);
reg_rddata |= 0x04;          //致能触摸中断
WriteDataToREG(0xa0,reg_rddata);
IT0=0;
//EA=1;
//EX0=1;
while(1)
{
reg_rddata = ReadDataFromREG(0xa0);
if(reg_rddata & 0x40)
{
   reg_rddata = ReadDataFromREG(0xa0);
   reg_rddata &= 0xfb;          //禁能触摸中断
   WriteDataToREG(0xa0,reg_rddata);
   get_touch();    //接收触摸键程序
}
reg_rddata = ReadDataFromREG(0xa0);
reg_rddata |= 0x04;          //致能触摸中断
WriteDataToREG(0xa0,reg_rddata);
   if(key_fg)
   {
         key_fg=0x00;
         key_x2=key_x1;key_x1=touchx/100;
         key_y2=key_y1;key_y1=touchy/100;
         Delay_Nms(20);
         if((key_x2!= key_x1)||(key_y2!=key_y1)) continue;
         key= xytab[(key_y1-1)*7+key_x1-1];
            switch(key) //判触摸地号11----77
            { case 31:
               case 32:
               case 33:
               case 34:
               case 35:
               case 36:
               case 37:  {WriteDataToREG(0x10,0x2b); //显示图形1
                              WriteDataToREG(0x00,0xc5);
                              lcd_photo(tab4);
                              Delay_Nms (3000);break;  }
               case 41:
               case 42:
               case 43:
               case 44:
               case 45:
               case 46: //下面是显示文字
               case 47:  {  WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab5);
                              Delay_Nms (3000);break; } //
               case 51: //下面可以增加
               case 52:
               case 53:
               case 54:
               case 55:
               case 56:
               case 57:  {WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab6);
                              Delay_Nms (3000);break; }
               case 61:
               case 62:
               case 63:
               case 64:
               case 65:
               case 66:
               case 67:  {WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab7);
                              Delay_Nms (3000);break; }
               case 71:
               case 72:
               case 73:
               case 74:
               case 75:
               case 76:
               case 77:  {WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab8);
                              Delay_Nms (3000);break; } // 减键
            }
   } }
}

2万 · 2020-7-26 12:31

你就不能将switch(key)
改成
switch(key / 10)
{
      case 3 :{WriteDataToREG(0x10,0x2b); //显示图形1
                              WriteDataToREG(0x00,0xc5);
                              lcd_photo(tab4);
                              Delay_Nms (3000);break;  }
      case 4 :{  WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab5);
                              Delay_Nms (3000);break; }
      case 5 :{WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab6);
                              Delay_Nms (3000);break; }

   case 6 :{WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab7);
                              Delay_Nms (3000);break; }

   case 7 :{WriteDataToREG(0x10,0x2b); //2b写汉字,3d写英文(粗字),
                              WriteDataToREG(0x00,0xc5); //0xcd写文字,0xc5写图形
                              lcd_photo(tab8);
                              Delay_Nms (3000);break; } // 减键

   default :
            break;
}
吗？

2万 · 2020-7-26 12:36

这大程序看得我头疼

2万 · 2020-7-26 12:43

2楼正解

1万 · 2020-7-26 12:45

懂了，谢谢