配置MSP430F6的频率失败怎么办

只看该作者 · 2014-11-29 20:27

经常在运行过程中有这个错误.

MSP430: Trouble Reading Memory Block at 0x23fc on Page 0 of Length 0x2: Could not determine device state 如果发生,在程序第一句就会发生
MSP430: Failed Software Reset: Could not read Enhanced Emulation Module register 在PMM设置后发生
MSP430: Trouble Reading Memory Block at 0x23fc on Page 0 of Length 0x2: No error 不设置PMM的话,直接配置时候会发生
MSP430: Trouble Reading Memory Block at 0xf3ffe on Page 0 of Length 0x95: Invalid parameter(s) 不设置PMM,直接设置也可能发生

配置外部32.768khz rtc时钟,必复位MCU.

TARGET:MSP430F6721

只看该作者 · 2014-11-29 20:27

#include

/*
* main.c
*/
int main(void) {

      WDTCTL = WDTPW | WDTHOLD;       // Stop watchdog timer

PJDIR |= BIT0 | BIT1 | BIT3;
PJSEL |= BIT0 | BIT1 | BIT3;
//
// PMMCTL0_H = PMMPW_H;
// SVSMHCTL = SVSHE + SVSHRVL0 * PMMCOREV_3 + SVMHE + SVSMHRRL0 * PMMCOREV_3;
// SVSMLCTL = SVSLE + SVMLE + SVSMLRRL0 * PMMCOREV_3;
// while ((PMMIFG & SVSMLDLYIFG) == 0);
// PMMIFG &= ~(SVMLVLRIFG + SVMLIFG);
// PMMCTL0_L = PMMCOREV0 * PMMCOREV_3;
// if ((PMMIFG & SVMLIFG))
//    while ((PMMIFG & SVMLVLRIFG) == 0);
// SVSMLCTL = SVSLE + SVSLRVL0 * PMMCOREV_3 + SVMLE + SVSMLRRL0 * PMMCOREV_3;
// PMMCTL0_H = 0x00;

// DCO  = 31 MOD = 0
UCSCTL0_H = 31;
UCSCTL1_L = DCORSEL_7;
UCSCTL4 = SELA__VLOCLK | SELS__DCOCLK | SELM__DCOCLK;
UCSCTL5 = DIVA__32 | DIVS__8 | DIVM__1;
UCSCTL6 &= ~(XT1OFF);
UCSCTL6 |= XCAP_3;

//
// do
// {
//       UCSCTL7 &= ~(XT2OFFG | XT1LFOFFG | DCOFFG);
//       SFRIFG1 &= ~OFIFG;
// } while (SFRIFG1 & OFIFG);

_nop();

while(1){

}

}

配置MSP430F6的频率失败怎么办

相关下载

相关帖子