# LINK COMMAND FILE AUTOMATICALLY GENERATED BY STVD7 # SHOULD NOT BE MANUALLY MODIFIED #
# Put you segment configuration here # define the .share segment when using compact or memory models only #<BEGIN SEGMENT_CONF> # Segment Code,Constants: +seg .const -b 0x8080 -m 0x1ff80 -n .const -it +seg .text -a .const -n .text # Segment Eeprom: +seg .eeprom -b 0x4000 -m 0x800 -n .eeprom # Segment Zero Page: +seg .bsct -b 0x0 -m 0x100 -n .bsct +seg .ubsct -a .bsct -n .ubsct +seg .bit -a .ubsct -n .bit -id +seg .share -a .bit -n .share -is # Segment Ram: +seg .data -b 0x100 -m 0x1300 -n .data +seg .bss -a .data -n .bss #<END SEGMENT_CONF>
# Put you startup file here (it depends on the model used) #<BEGIN STARTUP_FILE> crtsi.sm8 #<END STARTUP_FILE>
# Put your object files here (they depend on you application) #<BEGIN OBJECT_FILES> Debugad_scan.o Debugdisplay_text.o Debugeventnote.o Debugflash_eeprom_rw.o Debuglcm12232_driver.o Debugmain.o Debugset_menu.o Debug elephone.o Debugvoice_driver.o Debugwatchtimer.o Debugwireless_decode.o #<END OBJECT_FILES>
# Put your library name here (it depends on the model used) #<BEGIN LIBRARY_FILES> libis.sm8 libm.sm8 #<END LIBRARY_FILES>
# Put your interrupt vectors file here if needed #<BEGIN VECTOR_FILE> +seg .const -b 0x8000 -k Debugstm8_interrupt_vector.o #<END VECTOR_FILE>
#<BEGIN DEFINED_VARIABLES> +def __endzp=@.ubsct # end of uninitialized zpage +def __memory=@.bss # end of bss segment +def __stack=0x17ff #<END DEFINED_VARIABLES>
楼主
