另为的STM8S103最小系统可以连接，ST-LINK没有问题，VCAP电压1.8v,
> Programming PROGRAM MEMORY area...
Error : Cannot communicate with the device !
Check the SWIM cable connection and check all the needed pin connections on the SWIM connector.
If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider:
Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low.
Error : < PROGRAM MEMORY programming failed.
实在是无法解决了，求帮助
|
|
楼主
