[其他] RDA5807做了一个DIY收音机，可以收到17个电台

You are tuned on 88.5 MHz | RSSI: 045 dbUv | Vol: 02 | Yes 

You are tuned on 89.2 MHz | RSSI: 038 dbUv | Vol: 02 | Yes 

You are tuned on 89.7 MHz | RSSI: 047 dbUv | Vol: 02 | Yes 

You are tuned on 93.7 MHz | RSSI: 044 dbUv | Vol: 02 | Yes 

You are tuned on 95.2 MHz | RSSI: 043 dbUv | Vol: 02 | Yes 

You are tuned on 96.6 MHz | RSSI: 042 dbUv | Vol: 02 | Yes 

You are tuned on 97.5 MHz | RSSI: 059 dbUv | Vol: 02 | Yes

You are tuned on 98.1 MHz | RSSI: 045 dbUv | Vol: 02 | Yes  

You are tuned on  99.7 MHz | RSSI: 050 dbUv | Vol: 02 | Yes 

You are tuned on 100.5 MHz | RSSI: 044 dbUv | Vol: 02 | Yes 

You are tuned on 101.1 MHz | RSSI: 054 dbUv | Vol: 02 | Yes 

You are tuned on 102.4 MHz | RSSI: 045 dbUv | Vol: 02 | Yes 

You are tuned on 103.5 MHz | RSSI: 040 dbUv | Vol: 02 | Yes 

You are tuned on 104.3 MHz | RSSI: 051 dbUv | Vol: 02 | Yes 

You are tuned on 104.9 MHz | RSSI: 042 dbUv | Vol: 02 | Yes  

You are tuned on 105.8 MHz | RSSI: 045 dbUv | Vol: 02 | Yes 

You are tuned on 106.9 MHz | RSSI: 041 dbUv | Vol: 02 | Yes 

#include <Adafruit_GFX.h>    // Core graphics library

#include <Adafruit_ST7735.h> // Hardware-specific library for ST7735

#include <SPI.h>

#include <RDA5807.h>

#include <math.h>



RDA5807 rx;



#define TFT_CS         2

#define TFT_RST        3

#define TFT_DC         10

#define TFT_SCLK       4

#define TFT_MOSI       6



/*     默认的SPI接口为

static const uint8_t SS    = 7;

static const uint8_t MOSI  = 6;---SDA

static const uint8_t MISO  = 5;

static const uint8_t SCK   = 4;---SCL

*/

Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);

//Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST);



// color definitions

const uint16_t  Display_Color_Black        = 0x0000;

const uint16_t  Display_Color_Blue         = 0x001F;

const uint16_t  Display_Color_Red          = 0xF800;

const uint16_t  Display_Color_Green        = 0x07E0;

const uint16_t  Display_Color_Cyan         = 0x07FF;

const uint16_t  Display_Color_Magenta      = 0xF81F;

const uint16_t  Display_Color_Yellow       = 0xFFE0;

const uint16_t  Display_Color_White        = 0xFFFF;



// The colors we actually want to use

uint16_t        Display_Text_Color         = Display_Color_White;

uint16_t        Display_Backround_Color    = Display_Color_Black;



const size_t MaxString = 32;

char oldTimeString[MaxString]           = "4 14:29:30";

char oldFre[6]="97.5";

void displayUpTime() 

{

    unsigned long upSeconds = millis() / 1000;

    unsigned long days = upSeconds / 86400;

    upSeconds = upSeconds % 86400;

    unsigned long hours = upSeconds / 3600;

    upSeconds = upSeconds % 3600;

    unsigned long minutes = upSeconds / 60;

    upSeconds = upSeconds % 60;

    char newTimeString[MaxString] = { 0 };

    sprintf(newTimeString,"%lu %02lu:%02lu:%02lu",days, hours, minutes, upSeconds);

    if (strcmp(newTimeString,oldTimeString) != 0) {

        tft.setTextSize(2);

        tft.setCursor(0,0);

        tft.setTextColor(Display_Backround_Color);

        tft.print(oldTimeString);

        tft.setCursor(0,0);

        tft.setTextColor(Display_Text_Color);

        tft.print(newTimeString);

        strcpy(oldTimeString,newTimeString);

    }

}



// Show current frequency

void showStatus()

{

  char aux[80];

  sprintf(aux,"\nYou are tuned on %.1f MHz | RSSI: %3.3u dbUv | Vol: %2.2u | %s ",rx.getFrequency()/100.0, rx.getRssi(), rx.getVolume(), (rx.isStereo()) ? "Yes" : "No" );

  Serial.print(aux);



  tft.setTextSize(1);

  tft.setTextColor(Display_Backround_Color);

  tft.setCursor(70, 79);

  tft.print(oldFre);



  tft.setTextColor(Display_Text_Color);

  tft.setCursor(70, 79);

  sprintf(oldFre,"%.1f",rx.getFrequency()/100.0);

  tft.print(oldFre);

}



void showHelp()

{

  Serial.println(F("Type U to increase and D to decrease the frequency"));

  Serial.println(F("     S or s to seek station Up or Down"));

  Serial.println(F("     + or - to volume Up or Down"));

  Serial.println(F("     B or b to  Bass  On or Off"));

  Serial.println(F("     0 to use 87-108 MHz (US/Europe)"));

  Serial.println(F("     1 to use 76-91 MHz (Japan)"));

  Serial.println(F("     2 to use 76-108 MHz (world wide)"));

  Serial.println(F("     3 to use 65-76 MHz (East Europe) or 50-65MHz (see bit 9 of gegister 0x06)"));

  Serial.println(F("     4 to use 50-65 MHz"));

  Serial.println(F("     ? to this help."));

  Serial.println(F("=================================================="));

  delay(1000);

}







void setup() {



  Serial.begin(115200);

  while (!Serial);

  Serial.println();



  Wire.begin();  // 初始化I2C总线  

  rx.setup();

  rx.setVolume(2);

  // Select a station with RDS service in your place

  Serial.print("\nEstacao 97.50MHz");

  rx.setFrequency(9750); // It is the frequency you want to select in MHz multiplied by 100.

  delay(250);

//  rx.setLnaPortSel(3); // Trying improve sensitivity.

//  rx.setLnaIcSel(0);

  rx.setAFC(true);    // Sets Automatic Frequency Control

  showHelp();



  tft.initR(INITR_BLACKTAB);  //初始化屏幕

  tft.setFont();//初始化字体

  tft.fillScreen(Display_Backround_Color);

  tft.setTextColor(Display_Text_Color);

  tft.setTextSize(2);

  Serial.println("Hello");

    // a single pixel

  delay(500);

  for(uint8_t i=0;i<128;i++)

  {

    tft.drawPixel(i, 30+(sin(3.14159*i/32.0)*10), ST77XX_GREEN);

  }

  delay(500); 

  tft.fillRect( 2,45,30,10,ST77XX_GREEN);

  delay(500);

  tft.drawRect(40,45,30,10,ST77XX_GREEN);

  delay(500);

  tft.fillCircle( 90, 50, 5, ST77XX_GREEN);

  tft.drawCircle(110, 50, 5, ST77XX_GREEN);

  delay(500);

  tft.drawFastHLine(0, 65, tft.width(), ST77XX_RED);

  delay(500);

  for(uint8_t x=4;x<128;x=x+12)

  {

    tft.drawFastVLine(x, 65, 5, ST77XX_BLUE);

  }

  delay(500);

  tft.drawRect(2,75,tft.width()-(2*2),15,ST77XX_GREEN);

  tft.drawRect(4,77,18,11,ST77XX_BLUE);

  tft.drawRect(67,77,58,11,ST77XX_BLUE);

  tft.setTextSize(1);

  tft.setCursor(7, 77+2);

  tft.print("FM");

  tft.setCursor(70, 79);

  tft.print(oldFre);

  tft.setCursor(104, 77+2);

  tft.print("MHz");

}



void loop() {

  // put your main code here, to run repeatedly:

  displayUpTime();

  delay(100);

    if (Serial.available() > 0)

  {

    char key = Serial.read();

    switch (key)

    {

    case '+':

      rx.setVolumeUp();

      break;

    case '-':

      rx.setVolumeDown();

      break;

    case 'B':

      rx.setBass(true);

      break;

    case 'b':

      rx.setBass(false);

      break;      

    case 'U':

    case 'u':

      rx.setFrequencyUp();

      break;

    case 'D':

    case 'd':

      rx.setFrequencyDown();

      break;

    case 'S':

      rx.seek(RDA_SEEK_WRAP, RDA_SEEK_UP, showStatus);

      break;

    case 's':

      rx.seek(RDA_SEEK_WRAP, RDA_SEEK_DOWN, showStatus);

      break;

    case '0':  

    case '1':

    case '2':

    case '3':

      rx.setBand( key - 48 );

      rx.setBand3_50_65_Mode(1); // Band 3 will work from  65 to 76 MHz;

      rx.setFrequencyToBeginBand();

      Serial.print(F("\n**** Switching to band: "));

      Serial.print(rx.getBand());

      break;

    case '4': 

      // ATTENTION: The functions setFrequencyToBeginBand and setFrequencyToEnBand do not work for 50-65MHz setup. You have to control it by yourself.

      //            Also, you must control the band limits from 50 to 65 MHz. The setFrequencyUp and setFrequencyDown do not work properly. 

      rx.setBand(3);

      rx.setBand3_50_65_Mode(0); // Band 3 will work from  50 to 65 MHz;

      rx.setFrequency(5500); // 55 Mhz; rx.setFrequencyDown and rx.setFrequencyUP, rx.setFrequencyToBeginBand() and rx.setFrequencyToEndBand() do not work properly for this setup;

      Serial.print(F("\n**** Switching to band: 3 from 50 to 65 MHz) "));

      break;  

      break;

    case '?':

      showHelp();

      break;

    default:

      break;

    }

    delay(200);

    showStatus();

  } 

  delay(5);



}

// Show current frequency

void showStatus()

{

  char aux[80];

  if(rx.getRssi()>15)

  {

    sprintf(aux,"\nYou are tuned on %.1f MHz | RSSI: %3.3u dbUv | Vol: %2.2u | %s ",rx.getFrequency()/100.0, rx.getRssi(), rx.getVolume(), (rx.isStereo()) ? "Yes" : "No" );

    Serial.print(aux);



    tft.setTextSize(1);

    tft.setTextColor(Display_Backround_Color);

    tft.setCursor(70, 79);

    tft.print(oldFre);



    tft.setTextColor(Display_Text_Color);

    tft.setCursor(70, 79);

    sprintf(oldFre,"%.1f",rx.getFrequency()/100.0);

    tft.print(oldFre);

  }



}

// Show current frequency

void showStatus()

{

  char aux[80];

  if(rx.isStereo()&&(rx.getRssi()>15))

  {

    sprintf(aux,"\nYou are tuned on %.1f MHz | RSSI: %3.3u dbUv | Vol: %2.2u | %s ",rx.getFrequency()/100.0, rx.getRssi(), rx.getVolume(), (rx.isStereo()) ? "Yes" : "No" );

    Serial.print(aux);



    tft.setTextSize(1);

    tft.setTextColor(Display_Backround_Color);

    tft.setCursor(70, 79);

    tft.print(oldFre);



    tft.setTextColor(Display_Text_Color);

    tft.setCursor(70, 79);

    sprintf(oldFre,"%.1f",rx.getFrequency()/100.0);

    tft.print(oldFre);

  }



}