21ic电子技术开发论坛 › 单片机与嵌入式系统 › ST MCU › 【STM32MP135F-DK测评】SDK安装&运行第一个app程序 ...
返回列表 发新帖我要提问

[STM32MP1] 【STM32MP135F-DK测评】SDK安装&运行第一个app程序

[复制链接]
 楼主| xinmeng_wit 发表于 2024-1-3 18:07 | 显示全部楼层 |阅读模式
<
ST, STM, STM32, sd, sdk
本帖最后由 xinmeng_wit 于 2024-1-3 18:06 编辑

【安装SDK】
1、安装需要的工具
复制
  1. xinmeng@7420-vm:~$ sudo apt-get install build-essential libncurses-dev libyaml-dev libssl-dev
复制
  1. xinmeng@7420-vm:~$ sudo apt-get install coreutils bsdmainutils sed curl bc lrzsz corkscrew cvs subversion mercurial nfs-common nfs-kernel-server libarchive-zip-perl dos2unix texi2html libxml2-utils
2、配置MMC分区
必须安装额外的配置，以支持每个MMC最多16个分区。默认情况下，在Linux®系统上，MMC上最多允许8个分区。所有软件包（Starter软件包，…）的存储设备都需要10个以上的分区。为了将每个设备的分区数扩展到16个，必须向modprobe添加以下选项：
复制
  1. xinmeng@7420-vm:~$ echo 'options mmc_block perdev_minors=16' > /tmp/mmc_block.conf
    

  2. xinmeng@7420-vm:~$ sudo mv /tmp/mmc_block.conf /etc/modprobe.d/mmc_block.conf
3、下载SDK
下载en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.tar.gz放入目录$HOME/STM32MPU_workspace/tmp中。
下载地址：https://www.st.com/en/embedded-s ... v.html#get-software
4、解压SDK
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/tmp$ tar xvf en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.tar.gz
5、创建STM32MP1 Developer Package SDK目录
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/tmp$ mkdir -p $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK
6、增加SDK安装脚本的执行权限
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21$ chmod +x stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21/sdk/st-image-weston-openstlinux-weston-stm32mp1-x86_64-toolchain-4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.sh
7、执行SDK安装脚本
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21$ ./stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21/sdk/st-image-weston-openstlinux-weston-stm32mp1-x86_64-toolchain-4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.sh -d $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK
完成安装结果如下
复制
  1. ST OpenSTLinux - Weston - (A Yocto Project Based Distro) SDK installer version 4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21
    

  2. ===================================================================================================================================
    

  3. You are about to install the SDK to "/home/xinmeng/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK". Proceed [Y/n]? y
    

  4. Extracting SDK........................................................................................................................................................................................done
    

  5. Setting it up...done
    

  6. SDK has been successfully set up and is ready to be used.
    

  7. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
    

  8.  $ . /home/xinmeng/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi
注意：每次重开终端都必须重新source一下环境
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21[        DISCUZ_CODE_124        ]nbsp; cd $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package
    

  2. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package[        DISCUZ_CODE_124        ]nbsp; source SDK/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi
8、安装完成后检查环境是否正常

1）检查目标芯片架构
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $ARCH
返回结果：

arm
2）检查交叉编译工具
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $CROSS_COMPILE
返回结果：
arm-ostl-linux-gnueabi-
3）检查C编译器版本
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ $CC --version
返回结果：
arm-ostl-linux-gnueabi-gcc (GCC) 12.2.0
Copyright (C) 2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
4）检查SDK版本
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $OECORE_SDK_VERSION
返回结果：
4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21

【运行第一个APP程序】
1、创建目录用于存放app源代码
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21
    

  2. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources
    

  3. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example
2、进入gtk_hello_world_example目录
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ cd $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example
3、创建源文件gtk_hello_world.c并键入如下代码
复制
  1. #include <gtk/gtk.h>
    


  2. 

  3. static void
    

  4. print_hello (GtkWidget *widget,
    

  5.              gpointer   data)
    

  6. {
    

  7.   g_print ("Hello World\n");
    

  8. }
    


  9. 

  10. static void
    

  11. activate (GtkApplication *app,
    

  12.           gpointer        user_data)
    

  13. {
    

  14.   GtkWidget *window;
    

  15.   GtkWidget *button;
    

  16.   GtkWidget *button_box;
    


  17. 

  18.   window = gtk_application_window_new (app);
    

  19.   gtk_window_set_title (GTK_WINDOW (window), "Window");
    

  20.   gtk_window_set_default_size (GTK_WINDOW (window), 200, 200);
    


  21. 

  22.   button_box = gtk_button_box_new (GTK_ORIENTATION_HORIZONTAL);
    

  23.   gtk_container_add (GTK_CONTAINER (window), button_box);
    


  24. 

  25.   button = gtk_button_new_with_label ("Hello World");
    

  26.   g_signal_connect (button, "clicked", G_CALLBACK (print_hello), NULL);
    

  27.   g_signal_connect_swapped (button, "clicked", G_CALLBACK (gtk_widget_destroy), window);
    

  28.   gtk_container_add (GTK_CONTAINER (button_box), button);
    


  29. 

  30.   gtk_widget_show_all (window);
    

  31. }
    


  32. 

  33. int
    

  34. main (int    argc,
    

  35.       char **argv)
    

  36. {
    

  37.   GtkApplication *app;
    

  38.   int status;
    


  39. 

  40.   app = gtk_application_new ("org.gtk.example", G_APPLICATION_DEFAULT_FLAGS);
    

  41.   g_signal_connect (app, "activate", G_CALLBACK (activate), NULL);
    

  42.   status = g_application_run (G_APPLICATION (app), argc, argv);
    

  43.   g_object_unref (app);
    


  44. 

  45.   return status;
    

  46. }
4、创建Makefile文件并键入如下内容
复制
  1. PROG = gtk_hello_world
    

  2. SRCS = gtk_hello_world.c
    


  3. 

  4. CLEANFILES = $(PROG)
    


  5. 

  6. # Add / change option in CFLAGS and LDFLAGS
    

  7. CFLAGS += -Wall $(shell pkg-config --cflags gtk+-3.0)
    

  8. LDFLAGS += $(shell pkg-config --libs gtk+-3.0)
    


  9. 

  10. all: $(PROG)
    


  11. 

  12. $(PROG): $(SRCS)
    

  13.         $(CC) -o $[url=home.php?mod=space&uid=72445]@[/url] $^ $(CFLAGS) $(LDFLAGS)
    


  14. 

  15. clean:
    

  16.         rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS))
5、编译
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example$ make
编译后生成gtk_hello_world可执行文件
11.jpg

6、通过SSH上传到开发板
复制
  1. xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example$  scp gtk_hello_world root@192.168.7.1:/usr/local
22.jpg

33.jpg

7、运行程序
44.jpg
IMG_20240103_174504.jpg

第一个APP程序运行成功



回复 赏

举报

相关帖子
jobszheng 发表于 2024-1-16 18:51 | 显示全部楼层
s
有意思！
今天晚上复刻你的方案 ~~
回复 赏

举报

ming899 发表于 2024-1-18 14:18 | 显示全部楼层
s
赞！
回复 赏

举报

zhgongzuoshi 发表于 2024-6-25 15:52 | 显示全部楼层
s
1、安装需要的工具
是在板子上还是pc上的linux？
回复 赏

举报

LOVEEVER 发表于 2024-6-25 19:04 | 显示全部楼层
s
在Linux下进行的开发嘛？
回复 赏

举报

zhgongzuoshi 发表于 2024-7-4 16:45 | 显示全部楼层
s
请教一下博主，参考你的步骤尝试运行一个app,但是在编译make的时候遇到问题了，请指点一下：
880806686610a445e9.png
84782668661337d750.png
回复 赏

举报

hehhehee 发表于 2024-7-26 15:02 | 显示全部楼层
s
基本的初始化过程
#include "stm32h5xx_hal.h"

TIM_HandleTypeDef htim2;
TIM_OC_InitTypeDef sConfigOC;

// 定时器初始化函数
void MX_TIM2_Init(void)
{
    __HAL_RCC_TIM2_CLK_ENABLE();

    htim2.Instance = TIM2;
    htim2.Init.Prescaler = 0;
    htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
    htim2.Init.Period = 4095;
    htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
    htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
    if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
    {
        Error_Handler();
    }

    sConfigOC.OCMode = TIM_OCMODE_PWM1;
    sConfigOC.Pulse = 2048;
    sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
    sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
    if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
    {
        Error_Handler();
    }

    HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1);
}

// GPIO初始化函数
void MX_GPIO_Init(void)
{
    __HAL_RCC_GPIOA_CLK_ENABLE();

    GPIO_InitTypeDef GPIO_InitStruct = {0};
    GPIO_InitStruct.Pin = GPIO_PIN_0;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
}


回复 赏

举报

 楼主| xinmeng_wit 发表于 2024-7-29 12:15 | 显示全部楼层
s
zhgongzuoshi 发表于 2024-7-4 16:45
请教一下博主，参考你的步骤尝试运行一个app,但是在编译make的时候遇到问题了，请指点一下：

...

没有找到hello_world.c
这个文件是要自己写的
回复 赏

举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

xinmeng_wit

70

主题

276

帖子

2

粉丝
快速回复 在线客服 返回列表 返回顶部