移植官方的触摸库到stm8s003k3上，但是用ST进行调试的时候，一直跳不出中断 @far@interrupt void NonHandledInterrupt (void)
{
/* in order to detect unexpected events during development,
it is recommended to set a breakpoint on the following instruction
*/
return;
}
移植在return这里跳转不出来，求大神指导！
定时器2这里改成这样
#define TIMACQ (TIM2)
#define TIMACQ_CNTR_ADD (0x530C)
楼主
