|
ARM926 with USB 2.0 HS, SD/SDIO,2D Graphics with Touch, NAND,SRAM,SmartCard, Ethernet and Low Power.<br />FEATURES <br /><br />. 200-MHz ARM926EJ Processor <br />. 16-kbyte Instruction and 16-kbyte Data Caches <br />. DSP Extensions and Java enabled <br />. Linux.<br />, Microsoft. Windows CE.-enabled MMU <br />. Integrated Peripheral Interfaces: <br />. SD Card 2.0 Host Controller with legacy MMC and SPI <br />support. Supports high-speed and high capacity cards <br />. Two USB 2.0 High-speed Host or Device Ports <br />. One USB 2.0 Full-speed Host or Device Port <br />. Five 8 or 9 data bit UARTs with optional hardware flow <br />control. UART0 has modem control signaling <br />. 24-bit LCD and Raster Interface (RGB 8:8:8,5:6:5, 5:5:5 <br />and 24-bit YCbCr 4:4:4, 16-bit YCbCr 4:2:2, ITU656compliant <br />8-bit YCbCr 4:2:2) with Genlock support <br />. 2D Graphics Accelerator <br />. 8-bit NAND FLASH interface (512B or 2KB page sizes) <br />. 32-bit wide SDRAM Interface (up to 4 banks), <br />compatible with Mobile SDRAM devices<br />. 32/16-bit wide NOR FLASH and SRAM Interface <br />. Hardware-Controlled Master/Slave I2C. Interface <br />. 1/10/100 Mbps Ethernet MAC <br />. 4-, 5-, 7-, 8-Wire Touchscreen Interface with 16-bit ADC <br />. 8 x 8 Matrix Keypad Scanner <br />. Multimode SPI Port running up to 25 Mbps <br />. Highly configurable I2S Interface supports up to 6channel <br />audio with independent clock domains <br />. PWM Interface <br /><br />手机:13816698198 <br />QQ:16951849 <br />MSN:diegofanzs@hotmail.com |
|
楼主
