请伙计们帮忙翻译一段3GPP协议英文文档，十分感谢~！

发表于 2012-7-23 11:11

After a reset, a secondary station shall alternate between supported data rates. When alternating between data rates, the data rate shall be held constant for 300 ms

. After every correctly received device scan command (see [1]) independent of whether it matches or not, at one of the supported data rates, that data rate shall be held constant for 1.5 seconds. After successful reception of an address assignment frame, the secondary station shall use that data rate until it is reset.

尤其是红色部分~！

发表于 2012-7-23 11:52

本帖最后由 tyw 于 2012-7-23 11:54 编辑

http://translate.google.cn/#en|zh-CN|After%20a%20reset%2C%20a%20secondary%20station%20shall%20alternate%20between%20supported%20data%20rates.%20When%20alternating%20between%20data%20rates%2C%20the%20data%20rate%20shall%20be%20held%20constant%20for%20300%20ms%0D%0A%0D%0A.%20After%20every%20correctly%20received%20device%20scan%20command%20(see%20%5B1%5D)%20independent%20of%20whether%20it%20matches%20or%20not%2C%20at%20one%20of%20the%20supported%20data%20rates%2C%20that%20data%20rate%20shall%20be%20held%20constant%20for%201.5%20seconds.%20After%20successful%20reception%20of%20an%20address%20assignment%20frame%2C%20the%20secondary%20station%20shall%20use%20that%20data%20rate%20until%20it%20is%20reset.%0D%0A
先看个大概意思,再仔细推敲准确意思.

发表于 2012-7-24 10:10

老兄真快啊，可是哥不是不认识单词啊，是需要借助技术经验的协助分析。

发表于 2012-7-24 10:12

学英语，搞技术，别太指望那些在线翻译~！

发表于 2012-7-24 12:02

大概意思就是数据传输率的自动匹配，自动匹配过程，轮流设置设备速率为其支持的数据传输率，每种速率维持300ms，如果在300ms内有正确收到设备扫描命令，则维持此速率1.5s，直到正确收到分配地址的帧，保持此速率直到下一次复位

请伙计们帮忙翻译一段3GPP协议英文文档，十分感谢~！

相关帖子

浏览过的版块

技术高手奖章

涓涓之细流

经常做客

十世金身

终身成就奖章

坚毅之洋流

技术领袖奖章

突出贡献奖章

沉静之湖泊