|
今天试着烧一个别人给的FLASH程序，烧的时候提示“会烧到RAM区，可能无法上电自运行”，我点了“忽视”，只是想试一下。结果烧完测试无法自运行..那也就算了..问题是为什么现在连仿真器都连不上去了呢？<br /><br />点“connect”，出现致命错误：<br /><br />Error connecting to the target:<br />Error 0x80000240/-121<br />Fatal Error during: Initialization, OCS, <br />This error was generated by TI's USCIF driver.<br /><br />SC_ERR_CMD_HANDLE <-121><br />A bad controller handle has been given to a function,<br />either before attempting to open the controller, or after<br />having opened the controller and ignored its error status.<br />Valid controller handles are generated when attempts<br />to open the controller return a clean error status.<br /><br /><br />Sequence ID: 0<br />Error Code: -121<br />Error Class: 0x80000240<br />I/O Port = 240<br /><br />Board Name: F2812 XDS510 Emulator<br />Cpu Name: CPU_1<br /><br />之后点“Retry”的话，出的是另外一个错误代码：<br /><br />Error connecting to the target:<br />Error 0x80000200/-1037<br />Fatal Error during: OCS, <br />PTI_ERR_EMU_CLOSE Error Occured at 0x00000000<br /><br /><br />Sequence ID: 0<br />Error Code: -1037<br />Error Class: 0x80000200<br />I/O Port = 240<br /><br />Board Name: F2812 XDS510 Emulator<br />Cpu Name: CPU_1<br /><br /><br />晕啊...难道是哪里烧了？不至于吧？这是怎么回事呢？知道的大侠一定要帮帮忙！ |
|
楼主
