uC/OS-ii 移植到Atmeg128 编译环境为ICCV7 编译出错 can't open input file Test.hex
最终要生成的烧写的程序为 Test.h。但是出现错误 can't open input file Test.h。且未生成Test.h文件 编译后出现的提示为： E:\PROGRA~1\iccv7avr\bin\imakew -f TEST.mak iccavr -o TEST -LE:\Program -LFiles\iccv7avr\lib\ -g -e:0x20000 -ucrtatmega.o -bfunc_lit:0x8c.0x1f000 -dram_end:0x10ff -bdata:0x100.0x10ff -dhwstk_size:16 -beeprom:0.4096 -fcoff -S2 @TEST.lk -lcatm128 Device 3% full. can't open input file TEST.hex E:\PROGRA~1\iccv7avr\bin\imakew.exe: Error code 1 Done: there are error(s). Exit code: 1. Thu Mar 25 16:31:01 2010 哪位大侠给指点下，非常感谢！ |
|
楼主
