编译CY7C63813项目工程出的问题

2万 · 2011-3-14 20:08

//----------------------------------------------------------------------------
// C main line
//----------------------------------------------------------------------------

#include <m8c.h>       // part specific constants and macros
#include "PSoCAPI.h" // PSoC API definitions for all User Modules
#include "cypdef.h"          // Contains definitions for Endpoint registers

//----------------------------------------------------------------------------

//-----------------------
// Definitions and Types
//-----------------------
#define LED_ON             (P1DATA       &= 0xFB)
#define LED_OFF             (P1DATA       |= 0x04)
#define BUTTON_PU (P0DATA |= 0x08)
//-----------------------
// local function
//-----------------------
void delay(void);

void main(void)
{
      // M8C_EnableGInt ; // Uncomment this line to enable Global Interrupts
      // Insert your main routine code here.

//BYTE  i;
//BYTE epcnt;
//BYTE endpt_ram[8]={0,1,2,3,4,5,6,7};
//Button and LED init
LED_OFF;  //LED OFF
BUTTON_PU; //PULL UP BUTTON PIN
//USB init
// USB_Start(0);  // Enable USB
//M8C_EnableGInt; //and Global Interrupts
// Wait for USB enumeration
      /*while (0 == USB_bGetConfiguration());
USB_EnableEP(1); //EP1 is ocnfigured as OUT endpoint and EP2 is the IN endpoint
while (1)
{
            // Handle the LED from the Output Report on Endpoint 2
      if (OUT_BUFFER_FULL == USB_bGetEPState(1))
      {
         epcnt = USB_bGetEPCount(1);
         endpt_ram[0] = EP1DATA0;
         endpt_ram[1] = EP1DATA1;
         endpt_ram[2] = EP1DATA2;
         endpt_ram[3] = EP1DATA3;
         endpt_ram[4] = EP1DATA4;
         endpt_ram[5] = EP1DATA5;
         endpt_ram[6] = EP1DATA6;
         endpt_ram[7] = EP1DATA7;
         //Loads the IN enpoint with received data
         USB_LoadEP(2, &endpt_ram[0], epcnt);
         // This should be done with shadow registers on the GPIO ports
         if (endpt_ram[1] == 49)
         {
            LED_ON;
            delay();
         }
         else
         {
            LED_OFF;
         }
         // Unlocks the endpoint and sets it to ACK OUT
         USB_EnableEP(1);
      }

      //when the button is pressed ,send data to PC
      if(!(PRT0DR & 0x08))
      {
            LED_ON;
         //Loads the IN enpoint with received data
         USB_LoadEP(2, &endpt_ram[0], epcnt);
                  delay();
      }
      else
      {
            LED_OFF;
      }
            BUTTON_PU;
}*/
}
//==================================================================================
//  FUNCTION NAME: delay
//
//  DESCRIPTION: a delay time about 2senconds
//
//---------------------------------------------------------------------------------
//  ARGUMENTS:  NONE
//
//  RETURNS:  NONE
//
//  THEORY of OPERATION or PROCEDURE:
//
//==================================================================================
void delay(void)
{
      int i,j;
      for(i=0;i<500;i++)
      for(j=0;j<100;j++)
      {;}
}