做了一套板子，配置部分相关电路，图中标注NC的电阻都焊上了，用JTAG直接加载FPGA可以工作；对FLASH编程时提示编程成功，但DONE无法变高。PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 10000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file C:/Xilinx/13.1/ISE_DS/ISE/spartan3a/data/xc3s1400an_spi.cor.
'1': Downloading core...
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 1111 1100
INFO:iMPACT:2492 - '1': Completed downloading core to device.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Start block = 128 for address 0x000A0000.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - End block = 319 for address 0x00131211.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
'1': Erasing device...
done.
'1': Erasure completed successfully.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x000A0000 is in sector 5.
INFO:iMPACT - Address 0x00131211 is not located at the start of a sector boundary. The whole sector will be erased.
INFO:iMPACT - Address 0x00131211 is in sector 10.
INFO:iMPACT - Address 0x000A0000 is in page 1241.
INFO:iMPACT - Address 0x00131211 is in page 2367.
'1': Programming Flash...done.
'1': Programming completed successfully.
INFO:iMPACT - Address 0x000A0000 is in page 1241.
INFO:iMPACT - Address 0x00131211 is in page 2367.
'1': Verifying device...done.
'1': Verification completed successfully.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and spi mode settings.
PROGRESS_END - End Operation.
Elapsed time = 124 sec.
file:///C:\Documents and Settings\yu\Application Data\Tencent\Users\47397346\QQ\WinTemp\RichOle\96O$]FJT{TFJQ8$2`EJ4N%C.jpg |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册
×
|
楼主
