[信息] 关于初始化问题

想问一下我这个初始化有什么问题导致蓝牙没有打开到接收的功能，并且报错failed:0x48，具体想问一下是哪里设置出现问题了。

void Add_Server(void)
{
  uint8_t status = BLE_STATUS_SUCCESS;

const uint8_t uuid[16] = {0x66,0x9a,0x0c,0x20,0x00,0x08,0x81,0x98,0xeb,0x11,0x8b,0x7d,0x20,0xd1,0x69,0x86};
  const uint8_t charUuidTX[16] = {0x66,0x9a,0x0c,0x20,0x00,0x08,0x81,0x98,0xeb,0x11,0x8b,0x7d,0x21,0xd1,0x69,0x86};
  const uint8_t charUuidRX[16] = {0x66,0x9a,0x0c,0x20,0x00,0x08,0x81,0x98,0xeb,0x11,0x8b,0x7d,0x22,0xd1,0x69,0x86};
  
  Osal_MemCpy(&service_uuid.Service_UUID_128, uuid, 16);   
  status = aci_gatt_add_service(UUID_TYPE_128           ,&service_uuid          ,PRIMARY_SERVICE     ,0x04  ,&ServHandle);

                                                                                                    *红色表明的那位，用0x04的话蓝牙没有接收，发送和服务是正常的，用0x06的话就三个都错误了

  if (status != BLE_STATUS_SUCCESS) {
    PRINTF("aci_gatt_add_service() failed:0x%02x\r\n", status);
    APP_FLAG_SET(APP_ERROR);
  }else{
    PRINTF("aci_gatt_add_service --> SUCCESS\r\n");
  }
  

  Osal_MemCpy(&char_uuid.Char_UUID_128, charUuidTX, 16);
  status =  aci_gatt_add_char(ServHandle ,UUID_TYPE_128 , &char_uuid ,20 ,CHAR_PROP_NOTIFY  ,ATTR_PERMISSION_NONE   ,0   ,16 ,1 ,&TXCharHandle);

  if (status != BLE_STATUS_SUCCESS) {
    PRINTF("aci_gatt_add_TXchar() failed:0x%02x\r\n", status);
    APP_FLAG_SET(APP_ERROR);
  }else{
    PRINTF("aci_gatt_add_TXchar --> SUCCESS);
  }
  
  Osal_MemCpy(&char_uuid.Char_UUID_128, charUuidRX, 16);
  status =  aci_gatt_add_char(ServHandle    ,UUID_TYPE_128     ,&char_uuid        ,20                  ,CHAR_PROP_WRITE|CHAR_PROP_WRITE_WITHOUT_RESP   ,ATTR_PERMISSION_NONE   ,GATT_NOTIFY_ATTRIBUTE_WRITE    ,16             ,1              ,&RXCharHandle);
  
  if (status != BLE_STATUS_SUCCESS) {
    PRINTF("aci_gatt_add_RXchar() failed:0x%02x\r\n", status);
    APP_FLAG_SET(APP_ERROR);
  }else{
    PRINTF("aci_gatt_add_RXchar --> SUCCESS);
  }
}