- //***********************************************************************************************************
- // File Function: MG51 power down code for test power down current, BOD disabled.
- //***********************************************************************************************************
- #include "MG51_SDCC.H"
- void main (void)
- {
- /* UART0 settting for printf function */
- MODIFY_HIRC(HIRC_24);
- Enable_UART0_VCOM_printf_24M_115200();
- printf ("\n Test start ...");
- /* Quasi mode better for power down power comsuption (necessary) */
- ALL_GPIO_QUASI_MODE;
- P0=0;
- P1=0;
- P2=0;
- /* clock only for reference, real chip please don't output clock (necessary)*/
- set_CKCON_CLOEN;
- /*MUST Disable BOD to low power (necessary) */
- BOD_DISABLE; //BOD enable power down current please check datasheet DC charactor.
- /* Real into power down mode (necessary) */
- set_PCON_PD;
- while(1);
-
- }
| 
楼主
