项目工程里使用了RTX实时内核，包含了RTX.lib的库文件，其它关于添加文件到工程目录，初始化等都按常规方式操作，最后编译说提示如下错误信息：
linking...
.STM3210E-EVALSTM3210E-EVAL.axf: Error: L6200E: Symbol SVC_Handler multiply defined (by hal_cm3.o and stm32f10x_it.o).
.STM3210E-EVALSTM3210E-EVAL.axf: Error: L6200E: Symbol PendSV_Handler multiply defined (by hal_cm3.o and stm32f10x_it.o).
.STM3210E-EVALSTM3210E-EVAL.axf: Error: L6200E: Symbol SysTick_Handler multiply defined (by hal_cm3.o and stm32f10x_it.o).
.STM3210E-EVALSTM3210E-EVAL.axf: Not enough information to list image symbols.
.STM3210E-EVALSTM3210E-EVAL.axf: Not enough information to list the image map.
.STM3210E-EVALSTM3210E-EVAL.axf: Finished: 2 information, 0 warning and 3 error messages.
Target not created
把stm32f10x_it.c文件里的SVC_Handler、PendSV_Handler、SysTick_Handler三个函数注释掉，则编译时不报错，但程序在硬件上运行不起来，烦请各高手指教！！！ |
|
楼主
