|
小弟在往2812中下载程序时出现：<br /><br /> <br /><br />Can't Remove Breakpoint: Error 0x0000000A/-1153 Error during: Memory, Break Point, The memory at 0x003F87C1 continually indicated it was 'not ready' All memory operations currently in progress were aborted in order to regain control of the processor. This is considered a catastrophic event, but the debugger should still be able to access memory and CPU registers. System state has been altered. It is strongly advised that the processor should be reset before resuming execution,<br /><br />Breakpoint Manager: An error was encountered attempting to clear a breakpoint used<br /><br /> for end of program detection.<br /><br /> 2812软件复位时出现：<br /><br />Failed Software Reset: Error 0x00000020/-1150 Error during: Execution, JTAG protocol reset. t 0x003F87C1 continually indicated it was 'not ready' All memory operations currently in progress were aborted in order to regain control of the processor. This is considered a catastrophic event, but the debugger should still be able to access memory and CPU registers. System state has been altered. It is strongly advised that the processor should be reset before resuming execution,<br /><br />请问这两种故障是什么原因造成的 <br /> |
|
楼主
