VTarget = 3.254V
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
DLL version V7.94j, compiled Feb 14 2024 15:31:39
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware: V8.00
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Hardware-Breakpoints: 0
Software-Breakpoints: 0
Watchpoints: 0
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Invalid core Id. (0x00000000)
Trying to connect with 5 kHz !
Info: Could not measure total IR len. TDO is constant high.
Info: Failed to identify target. Resetting via Reset pin and trying again.
Info: Could not measure total IR len. TDO is constant high.
Invalid core Id. (0x00000000)
Error: Flash Download failed - Target DLL has been cancelled
Flash Load finished at 12:27:09 |
楼主
标题置顶
标题高亮
