(1) 画出对应的顶层电路原理图。
(2) 分析该电路的功能（底层元件DFFR为触发器,低电平复位）。
LIBRARY ieee;
•USE ieee.std_logic_1164.all;
•ENTITY test IS
• PORT(clk,di,reset: IN STD_LOGIC;
• qout: OUT STD_LOGIC );
•END;
•ARCHITECTURE bhv OF test IS
•component dffr
•PORT( clk, d,rst: IN STD_LOGIC;
• q: OUT STD_LOGIC );
•end component;
•signal tmp:STD_LOGIC_vector(0 to 3);
•signal reset0,reset1:STD_LOGIC;
•begin
•tmp(0)<=di;
•count_clk(0)<=clk;
•vcg:for i in 0 to 2 generate
•u0:dffr port map(rst=>reset0 ,clk=>clk,d=>tmp(i),q=>tmp(i+1));
•end generate;
•qout<= tmp(3);
•reset1<=not(tmp(2) and tmp(3));reset0<=reset and reset1;
end;
|
楼主
